RP20 Rotary Control Panel

Brand new phase control panel to be used in conjunction with a 20 Hp three phase idler motor. With this setup you will have a 20 Hp rotary phase converter your 20 Hp three phase idler motor should be rated at 230 volts and a rpm of 17XX ( 4-pole ) or 34XX ( 2-pole ). Please compare and check out the features of this control panel.

1. Builtin push button start-stop station with this setup your phase converter can not self start itself  if there was a single phase power loss and the power came back on. You would need to repress in the start button to retart the phase converter.
2. Builtin magnetic contactor
3. Heavy duty oil filled run capacitors.
4. Heavy duty start capacitors with discharge resistors.
5. Voltage sensing relay that controls the starting circuit of the phase converter.
6. Power contactor that controls the start capacitor circuit.
7. Terminal block to provide connect for your idler motor.
8. Fuse block that provides protection for the control circuit.
9. Holding contactor
10. Power light
11. Ground lug
12. Instructions
13. 2 year warranty